Shhhhh . . fabric and hand sanitizer transfer secret for Shards subscribers only

OK, so I’m not posting this to FaceBook or any other site – just to you blog subscribers (yay for you!). Here’s how the hand sanitizer transfer process works. This technique and a bunch of other cool ones will be featured in my Collage on Canvas class at Artful Gathering this summer. (Hint hint).

You’ll need some inkjet transparency sheets (be sure to get inkjet, not laser) and a color inkjet printer. Here’s a source for some very affordable ones at Amazon. Print your image onto the transparency using the grainy textured side as the printing surface (usually face down in the tray). Set it aside while you cut or tear a piece of white cotton sheeting to approximately the size of the transparency. Tape the fabric piece down to one of those flexible chopping boards boards at all four corners, stretching it taut but not overly tight.

So now you need a small bottle of clear hand sanitizer. I used one of the little travel sizes that I got for 89 cents at Walgreens. Run a strip of the stuff across the top of the fabric, and pull it down evenly with an old credit card 6or small piece of mat board. Once the fabric has been smoothly coated, place your printed transparency, ink side down, on the fabric and rub it in to adhere it. You can use the other side of the old credit card or mat board to do this. Set it aside for ten minutes or so, then rub it again before testing a corner by pulling it up. It should have transferred the ink from the transparency to the sheeting. Optional – take a hair dryer and slip it between the fabric and the cutting board to dry the fabric before you peel the film off – this will set it and hopefully keep it from smearing (although I have never had a problem with the ink smearing). Peel off the transparency film. That’s it! let me know how it works. Even if it doesn’t work perfectly, you’ll be germ free – LOL.

4